Tuesday, March 28, 2017

Frog 5x7" Print Process

For 2017 I'll be introducing a lot of new 5"x7" matted prints to my convention appearances and in my online store. Fans have been enjoying the Saxon, Gwendolyn, Sadie, and Kenzie prints in the same format, so in addition to adding more guardmouse characters for 2017, I'm also adding more animals/scenes.

In this post, I'll be sharing the process of creating the frog and mouse artwork to the left from concept to finished colors.




Julia and I made a list of the type of animals that would work well in this format. On her list of suggestions was "something like the frog and mouse-harvester on the cover of my 2015 sketchbook". Looking directly to that piece of artwork, I set to doing a piece that would fit the taller orientation and have a less tropical-looking frog species while making the frog more the focal point than the mouse.


I drew a frog (using some online reference for a northern leopard frog) and the mouse on separate sheets of copy paper. I assembled them all in Photoshop tinting each character a different color to help me see where one character started and the other ended. The outer line is a pre-set template I've made for this size of print so that it will float in the mat nicely...though, I'm not working at actual size, I'm working larger, but the proportions are right so that when the final version is printed to scale, everything will fit inside the mat.



I printed out the photoshop assembled layout and taped it to the back of a sheet of Strathmore 300 series bristol and inked on a lightpad. I use a Huion lightpad that allows me to see the printout through the surface of the bristol. This means that on the surface of the bristol will only be my inks, no pencil lines to erase (though sometimes, I do tighten up the pencils a bit as I work if the layout sketch is too loose). For pens I used Copic Multiliners, the 0.7 & 0.3 nibs. All of the grass I did on the fly as I inked.


Once the inks are scanned, I start the process of flatting the piece for color. This means laying in flat color (no concerns with shading or texture) to establish that areas like the frog's skin will be a different color than the rock, grass, of the mouse, etc.

Once the flat colors are in I start rendering each area using the dodge and burn tools (lighten and darken) with a textured brush. I also added some color holds on those stars/will-o-whisps in the background.


Here again is the finished colored artwork. This print and many more will be available at any of my convention appearances this year was well as in my online store.




For process posts on previous prints:



2017 Appearances: 
C2E2: April 21-23
Heroes Con: Jun. 16-18
San Diego Comic Con: July 19-23
Baltimore Comic Con: Sept. 22-24

Tuesday, March 21, 2017

Goose 5x7" Print Process

For 2017 I'll be introducing a lot of new 5"x7" matted prints to my convention appearances and in my online store. Fans have been enjoying the Saxon, Gwendolyn, Sadie, and Kenzie prints in the same format, so in addition to adding more guardmouse characters for 2017, I'm also adding more animals/scenes.

In this post, I'll be sharing the process of creating the goose and mouse artwork to the left from concept to finished colors.




I started with being inspired by the geese Mark Buckingham illustrated in his Legends of the Guard story ("The Gosling and the Ghost" in Vol. 3). I'd seen a goose piece Mark had done as part of a Fables promotion and asked him if he'd feature a goose in his Legends of the Guard story. The image of this gaggle from his page 1 of that story stuck with me, especially the hats. And in an effort to want to embrace and take advantage of all the great concepts contributors have added to the Mouse Guard world in the pages of Legends of the Guard, I set out to draw my own clothed goose.


I drew a goose wearing a hat with scarf and armor on a sheet of copy paper. On another sheet, I also drew a mouse in a basket. After scanning them both, adding a stock photo of some blueberries, and assembling them all in Photoshop, I had this composition for my print ready. Orange line is a pre-set template I've made for this size of print so that it will float in the mat nicely...though, I'm not working at actual size, I'm working larger, but the proportions are right so that when the final version is printed to scale, everything will fit inside the mat.



I printed out the photoshop assembled layout and taped it to the back of a sheet of Strathmore 300 series bristol and inked on a lightpad. I use a Huion lightpad that allows me to see the printout through the surface of the bristol. This means that on the surface of the bristol will only be my inks, no pencil lines to erase (though sometimes, I do tighten up the pencils a bit as I work if the layout sketch is too loose). For pens I used Copic Multiliners, the 0.7 & 0.3 nibs.


Once the inks are scanned, I start the process of flatting the piece for color. This means laying in flat color (no concerts with shading or texture) to establish that areas like the goose's feathers will be a different color than his hat or scarf, of the mouse, etc.

Once the flat colors are in I start rendering each area using the dodge and burn tools (lighten and darken) with a textured brush. I also added some color holds (areas where I want the inkwork to appear as a color rather than a black line) on the background lines, and the eye of the peacock feather.


Here again is the finished colored artwork. This print and many more will be available at any of my convention appearances this year was well as in my online store.





For process posts on previous prints:



2017 Appearances: 
C2E2: April 21-23
Heroes Con: Jun. 16-18
San Diego Comic Con: July 19-23
Baltimore Comic Con: Sept. 22-24

Tuesday, March 14, 2017

Fox 5x7 Print Process

For 2017 I'll be introducing a lot of new 5"x7" matted prints to my convention appearances and in my online store. Fans have been enjoying the Saxon, Gwendolyn, Sadie, and Kenzie prints in the same format, so in addition to adding more guardmouse characters for 2017, I'm also adding more animals/scenes.

In this post, I'll be sharing the process of creating the Fox and mouse-dwelling artwork to the left from concept to finished colors.




I started with a fox drawing (from reference of a fox in the snow) on copy paper. With all the dead thicket branches I planned to have in this piece getting in the way of the snow lines, I made life easier by laying a new sheet of copy paper over the fox drawing and then on a light pad draw them in around the fox. On yet another sheet of paper, I drew a little mousey building...



I found a photo online of this building called "The Shoemaker's Tower" in Sighisoara, Transilvania, Romania. I loved the shape of the roof peak, the offset tower, and the canopied balcony staircase. So, when I drew the little mousey version, I didn't change much other than making the lantern bigger and adding an existing mouse flag (see Black Axe). I decided that for one of the as-yet-unseen mouse towns, I'd use this aesthetic. So on my sketch I jotted down notes about one of the fallen towns: Woodruff's Grove. This is a small step towards developing that location, but this is a small step on which I can build much more in the future...but back to this print...




After I assembled the three drawings in photoshop (tinting them all to help my eye see where one ended and the other began...this is where having the branches separate from the snow-lines made a big difference) having these elements all on different sheets/layers I was able to make lots of adjustments to resize parts without affecting the lines of the things around them.



I printed out the photoshop assembled layout and taped it to the back of a sheet of Strathmore 300 series bristol and inked on a lightpad. I use a Huion lightpad that allows me to see the printout through the surface of the bristol. This means that on the surface of the bristol will only be my inks, no pencil lines to erase (though sometimes, I do tighten up the pencils a bit as I work if the layout sketch is too loose...in this case the eyes). For pens I used Copic Multiliners, the 0.7 & 0.3 nibs.



Once the inks are scanned, I start the process of flatting the piece for color. This means laying in flat color (no concerns with shading or texture) to establish that areas like the Fox's two different fur tones and making sure they are different from the branches, snow, building, etc.

Once the flat colors are in I start rendering each area using the dodge and burn tools (lighten and darken) with a textured brush. I added minimal colorholds on the snow linework and the flag embroidery.



Here again is the finished colored artwork. This print and many more will be available at any of my convention appearances this year was well as in my online store.




For process posts on previous prints:



2017 Appearances: 
Heroes Con: Jun. 16-18
San Diego Comic Con: July 19-23
Baltimore Comic Con: Sept. 22-24

Tuesday, March 7, 2017

Wind in the Willows Models: Rat's Boat & Dining Area

My illustrated edition of Kenneth Grahame's classic Wind in the Willows published by IDW has been released! The book has Grahame's original text, with over 70 illustrations by me.

For this week's blogpost I'm going to share a few of the physical models I used/built to help me visualize & illustrate the book. Below are photos of the models of Rat's boat & Rat's Dining Area. I've also included a few videos of me talking about the models.






RAT'S BOAT:
The first model I made for Wind in the Willows was Rat's boat. It's chipboard & bristol board. The oars are basswood & chipboard.







RAT'S DINING AREA:
I did purchase a few Victorian/Edwardian doll house furniture kits. Here I used a cupboard, round table & chairs with some printed paper windows, chip board & cardboard ceiling, and a paper oval mirror to make Rat's Dining area. 








Wind in the Willows from IDW is available to order at your local comic or book shop -or-
on Amazon.com:



For all my other Wind in the Willows Process Posts:





2017 Appearances: 
C2E2: April 21-23
Heroes Con: Jun. 16-18
San Diego Comic Con: July 19-23
Baltimore Comic Con: Sept. 22-24

Blog Archive